 |
PN 1004 $150.00 |
|
PN 1010 Vapor Return Option...................$25 Allows factory vapor return lines to be used with RobbMc pumps. Reduces the chance of vapor lock on hot days. Also reduces pressure and volume by about 15%. |
|
|
PN 1022 Endplate Outlet (–6AN)................$30 Moves the outlet port from the side of the pump to the endplate (in the same manner as an 1100HP pump). A –6AN fitting is installed in a modified endplate. This option can make installation much easier in many applications. |
|
|
PN 1023 Boost Reference..........................$25 This pump modification increases fuel pressure 1 psi for every 1 psi of blower or turbo boost. Used in blow through systems only. Not recommended for boost levels over 10 psi. |
|
|
PN 1035 Chrome 90° Outlet Fitting............$10 When the 1022 endplate outlet is not used, a 90° outlet fitting makes it much easier to route the line from the pump to the carb. This chrome fitting not only looks nicer than a brass hardware store fitting, but it is also more compact. |
|
|
AMC 550HP Fuel Pump Specifications:
AMC 550HP Fuel Pump Installation Instructions
and Troubleshooting Guide Note: Microsoft Word is required to view/print this document. Top of Page Back to Products Page |
|
