RobbMc Performance Products are proudly made in the USA
Cadillac Eldorado Mini-Starter
Mini-Starters
AMC
Buick
Buick Nailhead
Cadillac
Chevrolet
Eldorado
Ford A/T
Ford Big Block
Ford M/T
Hemi
Mopar
Oldsmobile
Pontiac
Toronado


Other Products
Regulator - Bypass
Regulator - Dead Head
Regulator - Dual Mode
Fuel Pumps
Thermostat Housings
Alignment Dowels
Dodge Magnum
Cap Adapter

Fuel Filters
Fittings
Cadillac Eldorado Starter
Compare RobbMc Starters with other starters

PN 2021

$269.00


PN 2025    Pinion Support Modification.......$50
Prevents pinion gear deflection on hard to start engines. Deflection can damage the pinion gear, the flywheel ring gear, and even the starter gear reduction assembly. Recommended for engines with any of the following:

  • Over 500 cubic inches
  • Over 11.5 to 1 compression ratio
  • Crank trigger ignitions
  • Magneto ignitions
  • More than 18° of ignition advance during cranking
  • Locked out or no distributor advance
  • Electronic start retard



PN 2008    Replacement Gear......................$20
Includes new retaining ring.

PN 2009    Short Gear..................................$10
This gear is 1/8" (.125") shorter than the standard length gear and is used when the standard gear is too close to the ring gear on the flywheel. Includes new retaining ring.

PN 2022    Replacement Nose......................$75
New screws included.

PN 2020    Replacement Solenoid...............$20



This starter fits:
  • 1968 – 1978 Cadillac Eldorado FWD V8


Notes:
  • This starter has a register diameter of 3.245" and the gear protrudes .22" past the mounting surface with the starter at rest.
  • The solenoid can be rotated to any position without taking the starter apart. We recommend positioning the solenoid under the starter motor and towards the oil pan. This makes it easier to connect the starter cable and keeps the solenoid away from exhaust heat.





Top of Page            Back to Products Page