RobbMc Performance Products are proudly made in the USA
Buick Nailhead Mini-Starter
Mini-Starters
AMC
Buick
Buick Nailhead
Cadillac
Chevrolet
Eldorado
Ford A/T
Ford Big Block
Ford M/T
Hemi
Mopar
Oldsmobile
Pontiac
Toronado


Other Products
Regulator - Bypass
Regulator - Dead Head
Regulator - Dual Mode
Fuel Pumps
Thermostat Housings
Alignment Dowels
Dodge Magnum
Cap Adapter

Fuel Filters
Fittings


Compare RobbMc Starters with other starters

PN 2023

$259.00


PN 2025    Pinion Support Modification.......$50
Prevents pinion gear deflection on hard to start engines. Deflection can damage the pinion gear, the flywheel ring gear, and even the starter gear reduction assembly. Recommended for engines with any of the following:

  • Over 500 cubic inches
  • Over 11.5 to 1 compression ratio
  • Crank trigger ignitions
  • Magneto ignitions
  • More than 18° of ignition advance during cranking
  • Locked out or no distributor advance
  • Electronic start retard



PN 2008    Replacement Gear......................$20
Includes new retaining ring.

PN 2009    Short Gear..................................$10
This gear is 1/8" (.125") shorter than the standard length gear and is used when the standard gear is too close to the ring gear on the flywheel. Includes new retaining ring.

PN 2024    Replacement Nose......................$75
New screws included.

PN 2020    Replacement Solenoid...............$20



This starter fits:
  • 1964 – 1966 Buick 401/425 Nailhead V8


Notes:
  • The solenoid can be rotated to any position without taking the starter apart. We recommend positioning the solenoid under the starter motor and towards the oil pan. This makes it easier to connect the starter cable and keeps the solenoid away from exhaust heat.
  • This starter is 7-1/8" long from the mounting surface to the end of the motor.





Top of Page            Back to Products Page