Compare RobbMc Starters with
other starters
|
PN 2021
$279.00
|
PN 2025 Pinion Support Modification.......$40
Prevents pinion gear deflection on hard to start engines. Deflection can damage the pinion gear, the flywheel ring gear, and even the starter gear reduction assembly. Recommended for engines with any of the following:
- Over 500 cubic inches
- Over 11.5 to 1 compression ratio
- Crank trigger ignitions
- Magneto ignitions
- More than 18° of ignition advance during cranking
- Locked out or no distributor advance
- Electronic start retard
|
|
PN 2008 Replacement Gear......................$30
Includes new retaining ring.
|
|
PN 2022 Replacement Nose......................$75
New screws included.
|
|
PN 2020 Replacement Solenoid...............$20
|
|
This starter fits:
- 1966 – 1978 Oldsmobile Toronado FWD V8
(1979-1985 Toronado FWD starters are available by special order. Contact us for more info)
Notes:
- This starter has a register diameter of 3.245" and the gear protrudes .22" past the mounting surface with the starter at rest.
- The solenoid can be rotated to any position without taking
the starter apart. We recommend positioning the solenoid under the
starter motor and towards the oil pan. This makes it easier to connect
the starter cable and keeps the solenoid away from exhaust heat.
- Starter comes standard with a three terminal solenoid which does not include an "R" terminal. For an extra $10, the starter can be supplied with a solenoid that includes an "R" terminal. The "R" terminal can improve starting on older cars that still use an ignition that requires a resister wire or ballast resistor. Email us for more info.
Top of Page
Back to Products Page
|
|
|
