Performance Products For The Rest Of Us
Made in the USA
Like us on
Facebook!

Olds Gen II Mini-Starter – PN 3004

Olds Gen II Mini-Starter

$269.00



Applications:

Oldsmobile 307-455 V8


Compare RobbMc Starters with other starters

PN 2025   Pinion Support Modification

Prevents pinion gear deflection on hard to start engines. Deflection can damage the pinion gear, the flywheel ring gear, and even the starter gear reduction assembly. Recommended for engines with any of the following:

  • Over 500 cubic inches
  • Over 11 to 1 compression ratio
  • Crank trigger ignitions
  • Magneto ignitions
  • More than 18° of ignition advance during cranking
  • Locked out or no distributor advance
  • Electronic start retard
  • Any engine that may kick-back during cranking

$30.00



PN 2015   Replacement Nose

Also known as the mounting block.

$49.00



PN 3020   Replacement Gen II Solenoid

Fits Gen II starters. Solenoid is held to starter with two screws.

$25.00



PN 2020   Replacement Solenoid

Fits older RobbMc starters. Solenoid is held to starter with three screws.

$20.00



Notes:

  • This starter is 7-7/16" long from the center of the mounting bolts to the end of the motor.
  • The solenoid can be rotated to any position without taking the starter apart. We recommend positioning the solenoid under the starter motor and towards the oil pan. This makes it easier to connect the battery cable and keeps the solenoid away from exhaust heat.
  • This starter uses standard OEM length mounting bolts available at any auto parts store. Use only true starter bolts, which have knurls on the shank.

RobbMc Gen II Ministarter Installation Instructions and Troubleshooting Guide
Note: Microsoft Word is required to view/print this document.


Top of Page Back to Products Page